Fall protection for
Wood
Discover our innovative product solutions for use on wood.
Our solutions for wood
-
LUX-top® ASP EV 7
Anchor point for screwing onto wooden beams / rafters
-
LUX-top® mobilE
Anchor point held by its own weight
-
LUX-top® ASP EV 7 II
Anchor point with load distribution plate for screwing onto roof formwork
-
LUX-top® SDS/ SDS-20
Attachment point for fastening through sandwich roof elements into the load-bearing substructure
-
LUX-top® SDA-Z II – Wood
Single anchor point for pitched roofs and pitched roofs with tile covering
-
LUX-top® CORDA – Wood
Pitched roof attachment point for fastening to wooden beams
-
LUX-top® ASP EV 10 II – Counter plate
Attachment points for fastening around beams, joists or other load-bearing components using a counter plate
-
LUX-top® ASP EV 10 III – Counter plate
Attachment points for fastening around beams, joists or other load-bearing components using a counter plate
-
LUX-top® ASP EV 9 III – Counter plate
Attachment points for fastening around beams, joists or other load-bearing components using a counter plate
-
LUX-top® ASP EV 2 – Counter plate
Attachment point for fastening using a counter plate around beams, joists or other load-bearing components
-
LUX-top® ASP EV 9 II – Counter plate
Attachment points for fastening around beams, joists or other load-bearing components using a counter plate
-
LUX-top® ASP EV 9 III – 420 counter plate
Attachment points for fastening around beams, joists or other load-bearing components using a counter plate
-
LUX-top® ASP EV 9 – Counter plate
Attachment points for fastening around beams, joists or other load-bearing components using a counter plate
-
LUX-top® DUO III
Attachment point for fastening to wooden roof elements
-
LUX-top® ASP EV 7 – HFE
Anchor point for screwing onto load-bearing wooden surface elements
-
LUX-top® SDA-B
Single anchor point for pitched roofs and pitched roofs with plain tile roofing
-
LUX-top® SDA-S
Single anchor point for pitched roofs and pitched roofs with slate covering
-
LUX-top® SDA-FZ
Single anchor point for pitched roofs and pitched roofs with flat tile roofing
-
LUX-top® ASP EV 5 – Counter plate
Attachment point for fastening using a counter plate around beams, joists or other load-bearing components
-
LUX-top® ASP EV 7 – A
Anchor point for screwing onto wooden beams / rafters
-
LUX-top® ASP EV 7 – G
Anchor point for screwing onto wooden beams / rafters
-
LUX-top® ASP EV 7 – LG
Anchor point for screwing onto wooden beams / rafters
-
LUX-top® ASP EV 6 U
Attachment point for fastening to wooden structures
-
LUX-top® SDA-DS
Attachment point for pitched roofs and pitched roofs with slate covering
-
Cable system LUX-top® FSE 2003 cannot be driven over
Horizontal stainless steel cable system in non-traversable design
-
Cable system LUX-top® FSE 2003 can be driven over
Horizontal stainless steel cable system in drive-over design
-
LUX-top® ASP EV 7
Anchor point for screwing onto wooden beams / rafters
-
LUX-top® mobilE
Anchor point held by its own weight
-
LUX-top® ASP EV 7 II
Anchor point with load distribution plate for screwing onto roof formwork
-
LUX-top® SDS/ SDS-20
Attachment point for fastening through sandwich roof elements into the load-bearing substructure
-
LUX-top® SDA-Z II – Wood
Single anchor point for pitched roofs and pitched roofs with tile covering
-
LUX-top® CORDA – Wood
Pitched roof attachment point for fastening to wooden beams
-
Ladder safety device LUX-top® LS II
Ladder safety device for pitched roofs for attachment to rafters or eaves planks, as well as to trapezoidal profiles or sandwich elements
-
LUX-top® ASP EV 10 II – Counter plate
Attachment points for fastening around beams, joists or other load-bearing components using a counter plate
-
Ladder safety device LUX-top® LS III
Ladder safety device for the flat roof for attachment to the façade (timber or concrete substructure)
-
LUX-top® ASP EV 10 III – Counter plate
Attachment points for fastening around beams, joists or other load-bearing components using a counter plate
-
LUX-top® ASP EV 9 III – Counter plate
Attachment points for fastening around beams, joists or other load-bearing components using a counter plate
-
LUX-top® ASP EV 2 – Counter plate
Attachment point for fastening using a counter plate around beams, joists or other load-bearing components
-
LUX-top® ASP EV 9 II – Counter plate
Attachment points for fastening around beams, joists or other load-bearing components using a counter plate
-
LUX-top® ASP EV 9 III – 420 counter plate
Attachment points for fastening around beams, joists or other load-bearing components using a counter plate
-
LUX-top® ASP EV 9 – Counter plate
Attachment points for fastening around beams, joists or other load-bearing components using a counter plate
-
LUX-top® DUO III
Attachment point for fastening to wooden roof elements
-
LUX-top® ASP EV 7 – HFE
Anchor point for screwing onto load-bearing wooden surface elements
-
LUX-top® SDA-B
Single anchor point for pitched roofs and pitched roofs with plain tile roofing
-
LUX-top® SDA-S
Single anchor point for pitched roofs and pitched roofs with slate covering
-
LUX-top® SDA-FZ
Single anchor point for pitched roofs and pitched roofs with flat tile roofing
-
LUX-top® ASP EV 5 – Counter plate
Attachment point for fastening using a counter plate around beams, joists or other load-bearing components
-
LUX-top® ASP EV 7 – A
Anchor point for screwing onto wooden beams / rafters
-
LUX-top® ASP EV 7 – G
Anchor point for screwing onto wooden beams / rafters
-
LUX-top® ASP EV 7 – LG
Anchor point for screwing onto wooden beams / rafters
-
LUX-top® ASP EV 6 U
Attachment point for fastening to wooden structures
-
LUX-top® SDA-DS
Attachment point for pitched roofs and pitched roofs with slate covering
-
LUX-top® FSA 2010 – H
Horizontal stop device with fixed guide
-
Protective net holder LUX-top® BEN
Safety net holder for nets according to DIN EN 1263-1
-
Cable system LUX-top® FSE 2003 cannot be driven over
Horizontal stainless steel cable system in non-traversable design
-
Cable system LUX-top® FSE 2003 can be driven over
Horizontal stainless steel cable system in drive-over design
-
LUX-top® FSA 2010 – H
Horizontal stop device with fixed guide
-
Ladder safety device LUX-top® LS II
Ladder safety device for pitched roofs for attachment to rafters or eaves planks, as well as to trapezoidal profiles or sandwich elements
-
Ladder safety device LUX-top® LS III
Ladder safety device for the flat roof for attachment to the façade (timber or concrete substructure)
-
Protective net holder LUX-top® BEN
Safety net holder for nets according to DIN EN 1263-1
Further fall protection according to substrate
We plan for you!
Successful construction projects start with sound planning.
Take advantage of our free planning service for sustainable implementation, taking into account your wishes and all technical and legal requirements (in accordance with DGUV Information 201-056).
No problem for us!
Your building project, our expertise. Individual special solutions, perfectly tailored to your needs. From architectural requirements to new roof structures and special fastening substrates – together we will develop the optimum solution for your project!
Things to know about fall protection on wood
Always an important building material for the roof, wood is increasingly being used constructively for the entire building.
In addition to load-bearing glulam beams, wall panels and ceiling elements made of wood have become frequently used building elements in modern architecture. This development is supported by the convincing ecological balance of the renewable raw material.
Fall protection on wooden surfaces
The use of wood is particularly suitable for the installation of fall protection on the roof, but also on the underside of the ceiling elements or inside the building, as well as on all exterior and interior walls.
Installation – regardless of how many components it consists of – is possible at practically any point on the wooden element. This gives architects and planners a high degree of design freedom and supports the architectural integration of the fall protection system.
LUX-top® offers you
the right fall protection for wood
LUX-top® has a wide range of products in its portfolio that have been developed for use in combination with timber elements. One example of this is the LUX-top® ASP EV 6 U anchor point for fastening to wooden beams or glued laminated timber (glulam for short). Or the LUX-top® ASP EV 7, which is screwed to the roof boarding with the glulam underneath.
The LUX-top® DUO III is also bolted through the roof boarding to the glulam beam below. With this anchor point, it is also possible to remove the stainless steel round bar for transportation. This considerably simplifies the site logistics of timber elements pre-assembled in the factory.
LUX-top® ASP EV 7 II makes installation even easier. The anchor point has a large load distribution plate and was developed for direct bolting to the roof boarding. This enables very flexible positioning on the roof. Additional fastening to the glulam is therefore not necessary.
