Fall protection for industrial roofs

The industrial roof is a complex component that has to fulfill many – sometimes contradictory – requirements. It should be lightweight so that it can span large areas without effort. At the same time, the roof should be strong enough to accommodate building technology components. If the worst comes to the worst, it should contribute to the protection of people and the building via the smoke and heat extraction system. The industrial roof is equipped with numerous skylight domes, continuous rooflights and other daylight elements so that natural daylight can be used and less artificial lighting is required. In addition, as a green roof with extensive or intensive greening or as an energy roof with photovoltaic or solar thermal systems, it will also make a major contribution to sustainability and the energy transition.

Whether trapezoidal profiles, sandwich elements, concrete structures or wooden constructions or metal roofs with a particularly good CO₂ balance: as absolute specialists and experienced manufacturers of fall protection systems, we have the right product for you.

Safety on industrial roofs: prevent falls with LUX-top®

Whether with or without parapet, greened, partially used, with or without penetrations: LUX-top® fall protection systems for industrial roofs offer an optimum solution for every design, enabling safe working on the roof in an uncomplicated manner. Load-supported or permanently installed side protection systems offer the greatest degree of freedom when working on the roof. These guardrails reduce the use of PPE (personal fall protection equipment) on the roof to a pleasant minimum.

Weather-resistant fall protection systems such as anchor points and rail systems from LUX-top® are ideal for installation on industrial roofs. Securely connected to the ground, our products for attaching PPE provide reliable support for users such as roofers, maintenance technicians and industrial climbers. Are you looking for solutions for collective protection on flat roofs? You are sure to find what you are looking for in our extensive range of guardrail systems!

With these products, LUX-top® ensures occupational safety on the roof

The following anchor points reduce the risk of falling on metal industrial roofs:

Trapezoidal profile:

• LUX-top® ASP EV 9 for mounting on trapezoidal profiles with profile heights up to 206 mm
• LUX-top® RVT for mounting on negatively laid trapezoidal profile

Sandwich elements:

• LUX-top® SDS and LUX-top® SDS-20 for fastening through sandwich roof elements into the supporting substructure

Use the following LUX-top® anchor points to reduce the risk of falling on concrete industrial roofs:

• LUX-top® ASP EV 2 for fixing to concrete ceilings/concrete components, min. C20/25 (B25)
• LUX-top® ASP EV 2s – 90° as a single or double curved version for lateral fixing to concrete. Particularly quick installation with only 2 fasteners.
• LUX-top® ASP EV 10 IIand LUX-top® ASP EV 10 III for mounting on prestressed concrete hollow core slabs with a minimum thickness of 28 mm
• LUX-top® KLICK II as a removable attachment point for fastening to concrete components, steel components or masonry. Particularly suitable for use in glass cleaning work
• LUX-top® KLICK SZP as a removable anchor point especially for rope access technology in accordance with the Technical Rules for Industrial Safety, TRBS 2121-3, perfectly suited for industrial climbers.
• LUX-top® RGD as abseiling point for rope-assisted access technology, also in accordance with TRBS 2121-3 for attachment to concrete or steel
• LUX-top® ONE Anchor point for quick and easy attachment to concrete or steel components
• LUX-top® ASP EV 11 for mounting on aerated concrete ceiling elements
• LUX-top® mobilEanchor point held by its own weight and therefore no penetration of the water-bearing level required

Metal roof:

• LUX-top® FALZ-PLUS II double standing seam for direct attachment to the flanged seam of the double standing seam profiles of the roof element
• LUX-top® FALZ-PLUS II roof profile sheeting for direct attachment to the flanged seam of the roof element
• LUX-top® FALZ-PLUS Evolution for direct attachment to the profiled sheet web of the roof element (for Zambelli RIB-ROOF Evolution)

Wooden constructions:

• LUX-top® ASP EV 7 for mounting on wooden beams
• LUX-top® ASP EV 7 II for fixing to formwork (board formwork, OSB-3 or plywood)

Our range includes the following rail system for installation on roofs in the industrial sector:

• LUX-top® FSA 2010 – H for use on concrete ceilings and concrete walls. Also suitable for rope access and positioning technology (SZP).

You will find the following guardrails for collective protection on industrial and flat roofs at LUX-top®:

• LUX-top® G-T QUICK for quick and economical installation thanks to plug-in connections (Plug & Safe)
• LUX-top® G-T HA, height adjustable
• LUX-top® G-T HA Green for use on green roofs, ballasting with substrate or gravel, no risk of tripping
• LUX-top® G-T foldable and tiltable, also available in a curved version.
• LUX-top® G-T DIREKTfor direct mounting on concrete and steel components, as well as negative-laid trapezoidal profiles via adapter plates on the flat roof
• LUX-top® G-T DIREKT AT for direct installation on the insulated or uninsulated parapet outside the water-bearing level
• LUX-top® G-T DIREKT WD II for direct mounting on thermally insulated flat roofs
• LUX-top® G-T LIKU for the protection of SHEVs, skylight domes, arcade rooflights and openings

Escape routes with LUX-top® G-T and commercially available paving slabs according to DIN 14094-2